How to reduce noise of industrial gearbox

How to reduce noise of industrial gearbox

1. Low noise gear structure design requirements. The influence of the gear structure design on noise is very important. The ideal design is: to increase the bending strength of the gear teeth as much as possible, and to select a larger coefficient of displacement and an appropriate helix angle so as to increase the meshing coefficient so as to reduce the noise.
2. The effect of gear manufacturing precision on noise. For standard series gearbox Motors, the manufacturing accuracy of the gear determines its noise value. The main purpose of a geared motor gear is to transmit speed and torque, so its gear manufacturing precision requirements, and its level of job-stability are primary. The gears with a higher level of work stability not only have a long service life, but also have a small impact and vibration in the transmission and a small noise. Therefore, the limitation of the work stability of the gears is the key to reduce gear noise.
3. The effect of accuracy of work stability on noise. The smoothness of the gearbox gear work is required to limit the change of the instantaneous speed ratio of the gear. The error is the rotational angle error that occurs several times per revolution of the gear. It causes the gear to produce impact, vibration and noise of the gear in the meshing process. It is a high-frequency impact sound. The factors that affect the smoothness of the work for a gear are its base-section error and its involute profile error.
4. The influence of the contact accuracy of reducer gears on noise. The comprehensive index for assessing gear contact accuracy is the contact spot, and the badly contacted gear has a large noise. Causes of unsatisfactory gear contact include: tooth-to-center errors affect tooth-to-head direction contact, base pitch and tooth shape errors affect tooth-to- tooth contact.
5. The effect of wheel eccentric bias on noise. Unbalanced centrifugal force is generated when the wheel eccentrically weighted gear is in the meshing operation. It is an alternating stress, which can cause vibration of the wheel train and generate noise. Therefore, dynamic balance detection of the gearbox wheel is necessary.